Concrete Mixer – SVM10/7 (Full Bag)

Batch Capacity: 200 Lts. (10/7 cft.)
Transmission: Drive from the engine is provided with roller chain & sprockets. The drive to loader shaft is through a cone clutch & chain the machine can be operated by Diesel Engine or Electric Motor.

Power Requirement: A: Diesel: 6 HP 1500 RPM. Air or Water cooled diesel engine.
B: Electric: 5 HP 3 Phase 1500 RPM
A.C. drive Electric Motor with starter.

Handling: Pneumatic tyre with roller bearing with excel shaft.

Concrete Mixer – SVM 7/5 CFT (3/4 Bag)

Batch Capacity: 140 Lts. (7/5 Cft.)
Transmission: Drive from the engine is provided with roller chain & machine cut sprockets.

Power Requirement: A: Diesel: 5 HP 1500 RPM. Air cooled or Water cooled.
B: Electric: 5 HP 3 Phase 1500 RPM
A.C. drive Electric Motor with starter.

Handling: Pneumatic tyre with roller bearing with excel shaft.

Concrete Mixer – SVM 5/3.5 CFT (Half Bag)

Batch Capacity: 100 Lts. (5/3.5 Cft.)
Transmission: Through ‘V’ groove pulley.

Power Requirement: A: Electric: 2 HP 1500 RPM. /3 Ph. Or 1 Ph. Electric Motor.
B:Diesel: 5 HP 1500 RPM. Air cooled or water cooled diesel
engine.

Weight Batcher

Capacity: 2 Hoppers of 250 kg capacity each to receive sand and metal.
Chassis: Heavy duty robust made out of heavy steel section.
Transmission: By mechanical joints provided with dust covered bearings.

Weighing System: Pan weight of 50 and 100 kg and jockey weight to adjust the weight from 0 kg to 50 kg’s.

Slab Trolley With Rails

Fully Manually operated equipment for slab casting.
Capacity: 500 kg (net weight) or 0.3 cubic meters
Trolley: For easy material ejection, swivels in 360° around its axis and can be tilted at 90°.

Rails: Made with 40 mm dia. pipe with left and right bends.
Wheels: C.I. Heavy duty wheels with ball bearings.

Tower Hoist

Capacity: 1000 kg gross load carrying capacity
Speed: 33 metres/min. but can also be designed according to the specific requirement.
Winch: Prime mover: 15 H.P. OR 18 H.P. Diesel Engine.
12.5 H.P. Electric Motor.

Drive: Friction roller type with self-aligning bearings.
Chassis: Heavy duty robusts made out of heavy steel section.
Wire Rope: Heavy duty (12 mm) steel core wire rope.

Vibrating Plate Compactor

Plate Size: 610 X 445 mm. (24 x 18 ins.)
Compacting Surface: 0.26 Sq. Meters (2.88 Sq. Ft.)
Height: 648 mm. (25.5 ins.) with handle extension removed.
Width: 630 mm. (28 ins.)
Weight: 150 Kg. (Approx.)
Centrifugal Force: 1.811 Kg. (3.994 lbs.) (Vibrating unit)
Vibration Frequency: 5,6000 v.p.m. maximum
Forwarding Motion: 14 to 20 Meters per minute (45 to 85 per min.)
Depending upon back till or surface conditions.

Concrete Block Machine

Three main sections the frame, the mould box and stripper head and the vibrator unit.
Out put: 1000 – 1200 blocks in 8 Hours.
Prime Mover: Electric motor 2 H.P. 50 Cycle
400/440 Volt, 3 Phase, 1440 R.P.M.

Maintenance: The machine should be kept lubricated at all points where grease caps have been provided.