|
|
|
|
|
Our product line is constantly evolving. Customers drive this
evolution. Our products represent an intersection between
our core competency - high-quality, low cost chemical manufacturing
- and a way to assist our customers in becoming more efficient
and profitable. Our products are supported by our expertise
in logistics and superior technical services.
|
| Hydrochloric Acid |
|
Packing: In carboys
|
| Appearance |
Colourless to pale Yellow |
| Specific Gravity % by mass at 20 deg. C
|
1.16 - 1.17
|
| Sulphates as H2So4 % by mass |
Traces max
|
| Sulphates as So2% by mass |
Traces max |
| Total acidity % by mass |
30-32 min
|
| Iron as Fe% by mass |
0.0002 max |
| Free chlorine (ppm) |
20.0 max |
| Mercury (ppm) |
Nil |
|
|
| Top |
| |
| Ammonium Chloride |
| Ammonium Chloride |
99.3% min |
| Moisture |
0.7% max |
| Burning residue |
0.4% max |
| Heavy metal |
0.0005% max |
| Sulphates |
0.02% max |
| Iron |
0.001% max |
| PH |
4.0 - 5.8 |
|
|
| Top |
| |
| HYDROGEN PER OXIDE (H2
O2) |
| Hydrogen Per Oxide |
35% |
50% |
| Stability (24 hrs at100ºC) |
95 Min. |
95 Min. |
| Acidity as H2 SO4 |
0.015 to 0.03 |
0.015 to 0.03 |
| Non Volatile Residue |
0.15 |
0.2 |
| Residue on iginition |
0.05 |
0.05 |
| Iron as Fe |
1.00 |
1.00 |
| Copper as Cu |
0.10 |
0.10 |
| Arsenic as As0 |
2.0 |
2.00 |
| Lead as Pb |
10.0 |
10.0 Max. |
| Packing |
|
30 Kg HMHDPE Carboysof blue colour |
| Loadability |
|
20.4 MT Per 20 ft. Container |
|
|
| Top |
| |
| Caustic Soda Flakes |
| Sodium Hydroxide (Na OH) % |
99.5 Min. ondry basis |
 |
| Sodium Carbonate (Na2CO3) |
0.40% |
| Chlorides as (NaCl) |
0.10% |
| Sulphates as (Na2SO4) |
0.002 Max |
| Packing |
50 Kgs HDPE Bags |
| Loadability |
21.5 MT per 20ft Container |
|
|
| Top |
| |
| METHYLENE CHLORIDE |
| Colour |
Alpha |
 |
| Specific Gravity
(15/4 deg. C) |
10 Max. |
| Purity (without Stabiliser)
% |
99.9 Min |
| Acidity as (HC1) |
0.0005 max. |
| Free Chlorine % |
0.001 max |
| Moisture ppm |
200 max. |
| Methyle Chloride ppm |
020 max. |
| 1-1 dischloroethane ppm |
150 max |
| 1-2 dis chlorethylene ppm |
80 max |
| Packing |
Zinc coated barrels of
250 Kgs |
| Loadablity |
80 such barrels in a 20
ft. Container |
|
|
| Top |
| |
|
CHLOROFORM
|
|
 CHARACTERISTICS
Minimum 99.9%pure
PROPERTIES
Chloroform is a heavy colourless, non flammable, volatile
(b.p.=61. 3°C) liquid miscible with organic solvents
and slightly soluble in water with etheric odour. It
finds use as industrial solvent and dissolves a wide
range of organic compounds.
APPLICATIONS
- Fluorocarbon refrigerants
- Fluorocarbon resins
- Fire-fighting agent
- Solvent in dye and perfume manufacture
- Extractant for naturally occurring substances, such
as penicillin, essential oils and alkaloids, especially
nicotine.
- Mildew preventives, soil fumigants
- Pharmaceutical preparations.
STABILITY
Chloroform can be used in the presence of light and
water with common construction metals upto 12°C.
However, in the presence of air, especially air and
light, even stabilized chloroform tends to develop acidity
on continued use.
PACKING
New Zinc coated non-returnable GI Barrels each of 250
kg. Net weight.
Specification:
|
| Characteristics |
Specifications |
| Colour (APHA) |
10 max |
| Sp. Gravity (15/4°C) |
1.498-1.502 |
| Purity % |
99.9 min. |
| Free Chlorine ppm |
001 max. |
| Moisture ppm |
100 max. + |
| Methylene Chloride ppm |
020 max. |
| Chloroform Tetrachloride
ppm |
020 max. |
| 1-1 dichloroethylene ppm |
80 max. |
| 1-2 dichloroethylene ppm |
100 max. |
|
| + Quantity of stabilizer can
be altered so as to meet customers requirements. |
|
| Top |
| |
|
SODIUM CYANIDE (NaCN)
|
|
 CHARACTERISTICS
Minimum 98.00% pure
PROPERTIES
Sodium Cyanide is pure white, highly poisonous highly
soluble in water, odourless when dry solid, available
in egg, granules or powder form.
The compacted egg form approximately weighs 6-7 gms.
The powder and granules are free flowing having bulk
density 0.7-0.8 kg/ltr and the particle size of grnules
is between 2 to 5 mm.
APPLICATIONS
- Metal and Mining industries
- Ore extraction-Silver and Gold
- Electroplating
- Case hardening of steel
- Metal cleaning
- Dyes Industries
- Pharmaceutical Industries
- Agrochemicals
- Chelating and Sequestering agents
REMARKS
Threashold limit value is 5 mg/M 3 (as cyanide dust)
as recommended by ACGIH 1987-88.
STABILITY
Sodium Cyanide is stable even at fairly high temperature
in the complete absence of Air, Carbondioxide and moisture.
When heated in a dry CO2 atmosphere, sodium
cyanide fuses without much decomposition. A brown black
colour appears when water vapour and CO2
are present at temperatures of 100?C below the fusion
point.
PACKING
50 Kg M.S. drums with plastic liner inside. 25 Kg. M.S.
drums with plastic liner inside.
Specification:
|
| Characteristics |
Specifications |
Sodium Cyanide
%
|
98.00 min |
Sodium Hydroxide %
|
0.50 max. |
Sodium Carbonate %
|
0.50 max. |
Sodium Formate %
|
0.50 max. |
Moisture %
|
0.20 max. |
|
|
| Top |
| |
| |
PHOSPHORIC ACID
|
|
|
 CHARACTERISTICS
Minimum 85% pure
PROPERTIES
Phosphoric Acid is colourless and odourless liquid.
It is soluble in water and alcohol. It is toxic by ingestion
and inhalation.
APPLICATIONS
- Pretreatment Chemicals
- Sugar Refining
- Anodising
- Stabilising Agent
- Waste Water Treatment Chemicals
- Activated Carbon
- Soaps and Detergents
STABILITY
Phosphoric Acid is chemically stable but it is corrosive
and attacks metals.
PACKING
30 Kgs. / 50 Kgs. HM HDPE Carboys, 300 kg HM HDPE barrels
and road tankers.
Specification:
|
| Characteristics |
Unit |
Specifications |
H PO Concentration
|
w/w |
86% ±0.5% |
| Iron as Fe |
PPM |
10 Max |
Sulphate as SO
|
PPM |
150-300 |
| Chloride as CI |
PPM |
40 Max |
| Flouride as F |
PPM |
100 Max |
| Ca and Mg |
PPM |
50 Max |
| Heavy metals as Pb |
PPM |
10 Max. |
| Colour |
|
Water White |
|
|
| Top |
| |
| CARBON TETRACHLORIDE |
|
CHARACTERISTICS
Minimum 99.9% pure free of sulphur
PROPERTIES
Carbon Tetrachloride is a heavy, colourless, non flammable
liquid with moderately strong ethereal, non irritant
odour and having boiling point 76.7°C. It is very
slightly soluble with water but miscible with a large
number of common organic liquids. It finds use as a
powerful industrial solvent, azeotropic during agent,
raw material for chlorofluorocarbon etc.
APPLICATIONS
- Fluorocarbon refrigerants
- Fluorocarbon propellants
- Grain fumigants and flour bleaching
- Solvent in chlorinated rubber manufacture and petroleum
refining industry.
- Grease removing agent for machinery and tools.
- Drycleaning fluid.
- Fire extinguisher.
- Flotation fluid, machining lubricant, synthesis
of nylon-7, pharmaceutical preparations.
STABILITY
Carbon tetrachloride can be used in the presence of
air and light with the common construction metals upto
130°C. In contact with water, it slowly hydrolyzes
to form hydrochloric acid and other products.
PACKING
New Zinc Coated non returnable G-I Barrels of 250kg
net weight.
Specification:
|
| Characteristics |
Specifications |
| Colour (APHA) |
10 max. |
| Sp. Gravity (15/4°C) |
1.600-1.608 |
Purity %
|
99.9 min. |
| Free Chlorine ppm |
001 max. |
| Moisture ppm |
50 max.+ |
| Methylene Chloride ppm |
010 |
| Chloroform ppm |
100 |
| Trichloroethylene ppm |
100 |
|
| + Ex-factory final |
|
| Top |
| |
| ZEOLITE (DETERGENT GRADE) |
| Assay |
78% |
Molecular formula
(Unit cell Content) |
Na12(ALO2)12(SiO2)12
27H2O |
| Solubility |
Insoluble in Water |
| Form |
Free flowing powder |
| Colour |
White |
| Free alkalinity (as Na2O)
|
0.55% |
Ion Exchange Capacity
(mg CaCO3/gm of Zeolite) |
150-250 |
| Average Particle size |
3-6 micron |
| Pore Size Diameter |
4A" |
| Moisture Loss @800 0c |
18-22% |
| Bulk Density (gms/cm3)
|
0.35-0.5 |
| PH ( 5% in Water) |
10-12 |
| Iron content (as Fe) |
<50ppm |
| Bulk Density (gms/cm3)
|
80 such barrels in a 20
ft. Container |
|
| NB: Specifications are
subject to change and will be confirmed at the time of
specific enquiry. |
|
| Top |
| |
| Titanium Dioxide B 101 |
|
Used in paints, chemical stability
of acid, alkali resistance and heat resistance; applicable
for colouring in printing inks, rubber, cosmetics, printing
and dyeing, soaps, paper, plastics, painting pigments,
etc.
Specification:
|
| Description |
A grade |
Acceptable |
| TiO2
content % |
> 98.5 |
97 |
| Decolorizing efficiency |
> 100 |
90 |
| Volatile components at
105 deg.C |
< 0.50 |
0.50 |
Volatile components at
105 deg C
After pretreating for 25 hr. at 23 +/-2 deg.C
and relative moisture of (50 (+/-5% |
< 0.50 |
0.50 |
| Water soluble % |
< 0.40 |
0.60 |
| PH of aqueous suspensions |
6.0 - 8.0 |
6.0 - 8.0 |
| Oil absorption g/100 g |
< 26 |
30 |
| Specification resistance
of water extraction solution Ω m |
>1.6x10 |
1.6x10 |
| 45 µ m oversize products% |
<0.1 |
0.3 |
|
|
 |
 |
| Top |
Engineering
Projects & Equipment
